Ordering Precast Concrete Fences for Factories and Housing Estates: What to Prepare, How Many Spans, Which Height

Last updated: 16 Nov 2026  |  166 Views  | 

รั้วคอนกรีตสำเร็จรูป 2 ช่วง มองตรงด้านหน้า

Quick answer

CCP precast concrete fences come in 3 models by post length: 2.25, 2.75 and 3.25 m, giving fence heights above ground of 2.00, 2.50 and 3.00 m respectively (the post base sits 25 cm into the footing). Posts are 3 m apart. Approximate spans = fence length ÷ 3, and posts = spans + 1. Before asking for a quote, prepare the fence length, the model, the number of corners and the delivery location. CCP manufactures and sells fence panels and posts only and does not provide installation, so please arrange an installation contractor.

Where precast concrete fences are used

  • Housing estates and homes
  • Industrial factories
  • Schools
  • Government sites

Advantages over fences cast or built on site:

  • Every piece is quality-controlled in the factory with a smooth, uniform finish along the whole line
  • No on-site formwork - panels slide straight into the posts
  • Less time, lower labour cost and fewer site errors - ideal for long fence lines
  • A complete set of components - fence panels, base panels, capping panels, line posts and corner posts
  • Special posts for barbed wire on top are available with their own design, so customers do not need to modify posts themselves

Special components: corner posts and barbed-wire posts

  • 20×20 cm right-angle corner post with panel grooves on two faces at 90°, taking fence panels in both directions in a single post for a neat square corner - no need to cast or modify corner posts on site
  • 15×15 cm barbed-wire post supplied from the factory with a steel head plate (70×70×6 mm) ready for a steel post with hooks for holding barbed wire to be welded onto the plate - extra security for factories, warehouses and areas that need intrusion protection
  • Both have their own drawings and can be ordered together with the fence panels in one go - no sourcing or modifying parts yourself

Choosing the model and fence height

Model (post length)Fence height above groundSpan length
2.25 m2.00 m3 m
2.75 m2.50 m3 m
3.25 m3.00 m3 m
  • The right height for a project should be set by the project owner or designer according to the project requirements
  • Need barbed wire on top? A 15×15 cm I-post with a steel head plate (70×70×6 mm) is available for welding on a steel post with hooks for holding barbed wire

Materials per span (3 m)

ComponentModel 2.25Model 2.75Model 3.25
Capping panel111
Fence panel6810
Base (soil-retaining) panel111
  • Posts: for a straight line, 15×15 cm I-posts = number of spans + 1 (e.g. 10 spans use 11 posts)
  • 90° corners: use a 20×20 cm corner I-post instead of a line post
  • Spans shorter than 3 m: panels are cut to fit the span
  • Our sales team calculates the actual quantities from your real fence line

Component sizes and weights

ComponentSize (cm)Approx. weight
Fence panel25 × 6.5 × 29295 kg
Base (soil-retaining) panel25 × 6.5 × 29295 kg
Capping panel25 × 6.5 × 292155 kg
I-post 15×15 (model 2.25)15 × 15 × 22594 kg
Corner I-post 20×20 (model 2.25)20 × 20 × 225185 kg

Actual dimensions may vary from the drawing by ±1 cm. The components are heavy, so lifting and sliding in panels should be done by several people or with machinery. Drawings can be downloaded from the precast concrete fence product page.

Base panels and backfilling

  • The base panel is the bottom panel, used when the ground levels on the two sides differ or when extra fill is needed
  • Fill against the fence should not exceed 0.15 m above the original ground; for more fill, the design should be done by an engineer

Estimating the number of spans

Fence lengthApproximate spansPosts (straight line)
60 m20 spans21 posts
100 m34 spans35 posts
150 m50 spans51 posts
300 m100 spans101 posts

These figures are for a first estimate only. Our sales team calculates the actual quantities from the fence line, corners and gate positions.

Before asking for a quote: prepare 6 things

  1. Total fence length (m) - attach the drawing or fence layout if you have one
  2. Model 2.25 / 2.75 / 3.25 m and whether you need posts for barbed wire on top
  3. Number of corners
  4. Gate positions or gaps
  5. Delivery location, so the quote can include transport
  6. When you need the goods and whether trucks can reach the site

How a precast concrete fence is installed

  1. Set out the line and measure accurately so the footings are in line and the posts are correctly spaced
  2. Set the posts on the footings and check that each post is plumb and square
  3. Slide the base panel and the fence panels into the post grooves one by one
  4. Fit the top panel (capping)
  5. Check level and alignment along the whole span
  • Footings: size and type follow the installer's design and site soil conditions
  • Finishing work such as backfilling around posts and finishing joints is done as suitable for the site
  • CCP manufactures and sells fence panels and posts and does not provide installation; please arrange a contractor experienced in precast fences

Painting

CCP does not supply pre-painted fences. We recommend painting after installation, as paint may be damaged during transport and installation.

Delivery

Delivered from our factory in Chonburi, covering the Eastern region such as Chonburi, Rayong, Chachoengsao and Sa Kaeo, and nationwide. Tell us the delivery location to get a quote including transport.

Frequently asked questions

How tall is a CCP precast concrete fence?

3 models by post length - 2.25 / 2.75 / 3.25 m - giving fence heights above ground of 2.00 / 2.50 / 3.00 m, with 3 m spans.

What post is used at fence corners?

A 20×20 cm right-angle corner post with panel grooves on two faces at 90°, taking panels in both directions. Tell us the number of corners when asking for a quote.

How do I add barbed wire on top?

Order barbed-wire posts with a steel head plate, then weld a steel post with hooks for holding barbed wire onto the plate provided. They have their own design, so no post modification is needed.

How many panels per span?

Model 2.25: 1 capping panel + 6 fence panels + 1 base panel. Model 2.75 uses 8 fence panels and model 3.25 uses 10 (plus 1 capping and 1 base panel each).

How many spans and posts for a 100 m fence?

About 34 spans (100 ÷ 3 = 33.3, rounded up) and about 35 posts for a straight line. Spans shorter than 3 m use cut panels. Our sales team calculates the actual quantities from your real fence line.

Does CCP install fences?

No. CCP manufactures and sells fence panels and posts only.

Can you deliver to other provinces?

Yes, nationwide from our Chonburi factory. Transport cost depends on the delivery location.

What do I need to tell you for a quote?

Fence length, model, number of corners, gate positions, delivery location and when you need the goods.

Read more and order

To order precast concrete fences, contact CCP sales: 092-224-6640, 085-123-8961, 081-341-1610, 085-123-7254, 086-983-8709, 061-401-2720, 090-090-4926 or LINE @ccp-concrete

Read next: Adding Barbed Wire to a CCP Precast Concrete Fence: What You Need

This website uses cookies for best user experience, to find out more you can go to our นโยบายความเป็นส่วนตัว  and  นโยบายคุกกี้