Adding Barbed Wire to a CCP Precast Concrete Fence: What You Need

Last updated: 16 Nov 2026  |  97 Views  | 

การติดตั้งแผ่นผนังรั้วสำเร็จรูประหว่างเสา

Short answer: Yes — a CCP precast concrete fence can carry barbed wire on top. Order "plate posts": I-posts with a 70×70×6 mm steel plate cast into the head. Once the fence is up, the contractor welds a steel post with hooks for holding barbed wire onto each plate and hangs the wire on the hooks. The concrete posts never need drilling or chiselling.

Why factories and industrial estates choose concrete fence + barbed wire

  • A solid concrete wall blocks sight lines and ground-level intrusion
  • Barbed wire on top makes climbing over much harder — ideal for factories, warehouses and storage yards
  • Plate posts arrive ready from the factory, so there is no anchoring or drilling on site

Parts to order

PartSupplied byNotes
Fence panels, capping panels, base panelsCCPAccording to fence model
15×15 cm I-post with 70×70×6 mm steel plateCCP (special-order post)Replaces standard I-posts along the barbed-wire run
20×20 cm corner postCCPFor right-angle turns
Steel post with hooks for holding barbed wireContractor / ownerWelded to the plate on the post head
Barbed wireContractor / owner–

Plate-post drawing: Download PDF

Typical sequence

  1. Set out the fence line and mark the runs that need barbed wire; tell our sales team so plate posts are ordered for those runs
  2. Install the fence as usual: set posts → slide in base panels and fence panels → add capping panels → check line and level
  3. Weld a steel post with hooks for holding barbed wire onto the plate at each post head
  4. Hang the barbed wire on the hooks along the run

Welding details, number of wire strands and steel-post design follow the installer's drawings. Talk to CCP sales and send your drawings before production.

Good to know

  • CCP manufactures and sells fence panels and posts; we do not install
  • Order plate posts together with the fence — the plate is cast in at the factory

Frequently Asked Questions

Can barbed wire be added to a fence that is already installed?

Standard I-posts have no plate to weld to, so order plate posts before installation. If your fence is already up, talk to our sales team about options.

Does CCP sell the steel posts for barbed wire?

CCP sells the concrete plate posts. The steel posts with hooks and the barbed wire are supplied and welded on by the contractor.

Do the plate posts have holes for threading barbed wire?

No. There are no holes — the barbed wire hangs on the hooks of the steel post welded to the plate.

How do I install a right-angle corner?

Use a CCP 20×20 cm corner post at the turn. It takes fence panels from both perpendicular directions, so nothing needs to be cast on site. Tell us how many corners you have when you request a quote.

Enquiries / send drawings for review: CCP Sales 092-224-6640 · LINE @ccp-concrete

See also: Precast concrete fence · How to order a precast concrete fence · Standards & certifications

This website uses cookies for best user experience, to find out more you can go to our นโยบายความเป็นส่วนตัว  and  นโยบายคุกกี้