Quick answer
CCP precast concrete fences come in 3 models by post length: 2.25, 2.75 and 3.25 m, giving fence heights above ground of 2.00, 2.50 and 3.00 m respectively (the post base sits 25 cm into the footing). Posts are 3 m apart. Approximate spans = fence length ÷ 3, and posts = spans + 1. Before asking for a quote, prepare the fence length, the model, the number of corners and the delivery location. CCP manufactures and sells fence panels and posts only and does not provide installation, so please arrange an installation contractor.
Where precast concrete fences are used
- Housing estates and homes
- Industrial factories
- Schools
- Government sites
Advantages over fences cast or built on site:
- Every piece is quality-controlled in the factory with a smooth, uniform finish along the whole line
- No on-site formwork - panels slide straight into the posts
- Less time, lower labour cost and fewer site errors - ideal for long fence lines
- A complete set of components - fence panels, base panels, capping panels, line posts and corner posts
- Special posts for barbed wire on top are available with their own design, so customers do not need to modify posts themselves
Special components: corner posts and barbed-wire posts
- 20×20 cm right-angle corner post with panel grooves on two faces at 90°, taking fence panels in both directions in a single post for a neat square corner - no need to cast or modify corner posts on site
- 15×15 cm barbed-wire post supplied from the factory with a steel head plate (70×70×6 mm) ready for a steel post with hooks for holding barbed wire to be welded onto the plate - extra security for factories, warehouses and areas that need intrusion protection
- Both have their own drawings and can be ordered together with the fence panels in one go - no sourcing or modifying parts yourself
Choosing the model and fence height
| Model (post length) | Fence height above ground | Span length |
|---|
| 2.25 m | 2.00 m | 3 m |
| 2.75 m | 2.50 m | 3 m |
| 3.25 m | 3.00 m | 3 m |
- The right height for a project should be set by the project owner or designer according to the project requirements
- Need barbed wire on top? A 15×15 cm I-post with a steel head plate (70×70×6 mm) is available for welding on a steel post with hooks for holding barbed wire
Materials per span (3 m)
| Component | Model 2.25 | Model 2.75 | Model 3.25 |
|---|
| Capping panel | 1 | 1 | 1 |
| Fence panel | 6 | 8 | 10 |
| Base (soil-retaining) panel | 1 | 1 | 1 |
- Posts: for a straight line, 15×15 cm I-posts = number of spans + 1 (e.g. 10 spans use 11 posts)
- 90° corners: use a 20×20 cm corner I-post instead of a line post
- Spans shorter than 3 m: panels are cut to fit the span
- Our sales team calculates the actual quantities from your real fence line
Component sizes and weights
| Component | Size (cm) | Approx. weight |
|---|
| Fence panel | 25 × 6.5 × 292 | 95 kg |
| Base (soil-retaining) panel | 25 × 6.5 × 292 | 95 kg |
| Capping panel | 25 × 6.5 × 292 | 155 kg |
| I-post 15×15 (model 2.25) | 15 × 15 × 225 | 94 kg |
| Corner I-post 20×20 (model 2.25) | 20 × 20 × 225 | 185 kg |
Actual dimensions may vary from the drawing by ±1 cm. The components are heavy, so lifting and sliding in panels should be done by several people or with machinery. Drawings can be downloaded from the precast concrete fence product page.
Base panels and backfilling
- The base panel is the bottom panel, used when the ground levels on the two sides differ or when extra fill is needed
- Fill against the fence should not exceed 0.15 m above the original ground; for more fill, the design should be done by an engineer
Estimating the number of spans
| Fence length | Approximate spans | Posts (straight line) |
|---|
| 60 m | 20 spans | 21 posts |
| 100 m | 34 spans | 35 posts |
| 150 m | 50 spans | 51 posts |
| 300 m | 100 spans | 101 posts |
These figures are for a first estimate only. Our sales team calculates the actual quantities from the fence line, corners and gate positions.
Before asking for a quote: prepare 6 things
- Total fence length (m) - attach the drawing or fence layout if you have one
- Model 2.25 / 2.75 / 3.25 m and whether you need posts for barbed wire on top
- Number of corners
- Gate positions or gaps
- Delivery location, so the quote can include transport
- When you need the goods and whether trucks can reach the site
How a precast concrete fence is installed
- Set out the line and measure accurately so the footings are in line and the posts are correctly spaced
- Set the posts on the footings and check that each post is plumb and square
- Slide the base panel and the fence panels into the post grooves one by one
- Fit the top panel (capping)
- Check level and alignment along the whole span
- Footings: size and type follow the installer's design and site soil conditions
- Finishing work such as backfilling around posts and finishing joints is done as suitable for the site
- CCP manufactures and sells fence panels and posts and does not provide installation; please arrange a contractor experienced in precast fences
Painting
CCP does not supply pre-painted fences. We recommend painting after installation, as paint may be damaged during transport and installation.
Delivery
Delivered from our factory in Chonburi, covering the Eastern region such as Chonburi, Rayong, Chachoengsao and Sa Kaeo, and nationwide. Tell us the delivery location to get a quote including transport.
Frequently asked questions
How tall is a CCP precast concrete fence?
3 models by post length - 2.25 / 2.75 / 3.25 m - giving fence heights above ground of 2.00 / 2.50 / 3.00 m, with 3 m spans.
What post is used at fence corners?
A 20×20 cm right-angle corner post with panel grooves on two faces at 90°, taking panels in both directions. Tell us the number of corners when asking for a quote.
How do I add barbed wire on top?
Order barbed-wire posts with a steel head plate, then weld a steel post with hooks for holding barbed wire onto the plate provided. They have their own design, so no post modification is needed.
How many panels per span?
Model 2.25: 1 capping panel + 6 fence panels + 1 base panel. Model 2.75 uses 8 fence panels and model 3.25 uses 10 (plus 1 capping and 1 base panel each).
How many spans and posts for a 100 m fence?
About 34 spans (100 ÷ 3 = 33.3, rounded up) and about 35 posts for a straight line. Spans shorter than 3 m use cut panels. Our sales team calculates the actual quantities from your real fence line.
Does CCP install fences?
No. CCP manufactures and sells fence panels and posts only.
Can you deliver to other provinces?
Yes, nationwide from our Chonburi factory. Transport cost depends on the delivery location.
What do I need to tell you for a quote?
Fence length, model, number of corners, gate positions, delivery location and when you need the goods.
Read more and order
To order precast concrete fences, contact CCP sales: 092-224-6640, 085-123-8961, 081-341-1610, 085-123-7254, 086-983-8709, 061-401-2720, 090-090-4926 or LINE @ccp-concrete
Read next: Adding Barbed Wire to a CCP Precast Concrete Fence: What You Need